彩涂产品

Coating type and material	Code	Typical coating thickness range, μМ	Typical coating thickness, μМ
Paint (coating thickness of 5 to 60 μМ depending on coating material
Acryl	AY	5-25	25
Epoxide	EP	3-20	not set
Polyester	SP	5-60	25
Polyamide modified polyester	SP-PA	15-50	25
Silicon modified polyester	SP-SI	15-40	25
Acryl silicon	AY-SI	25	25
Polyurethane	PUR	10-60	25
Polyamide modified polyurethane	PUR-PA	10-50	25
Polyvnylidene fluoride	PVDF	20-60	25
Plastisol (with coating thickness from 40 to 200 μМ )
Polyvinylchloride plastisol	PVS(P)	40-200	100; 200

By type of edge:

· mill edge

· trimmed edge

By type of steel substrate:

· thin-gauge cold rolled

The steel substrate complies with all the standards established for:

· cold rolled products as per:

o EN 10130 (steel grades DC01, DC03, DC04)

o TU 14-101-496 (deep drawing, extra deep drawing and super deep drawing quality)

o GOST 9045 (extra deep drawing quality)

o GOST 16523 (strength classes K260V, K270V, K310V, K330V, K350V, K390V, K490V, OK360V, OK370V; deep drawing classes G and N)

o GOST 13345 (ChZHk), etc

· thin-gauged, cold rolled, hot dip galvanized

The steel substrate complies with all the standards established for:

· cold rolled hot dip galvanized products:

o EN 10142 (steel grades DX51D+Z, DX52D+Z, DX53D+Z, DX54D+Z, DX56D+Z)

o EN 10147(steel grades S220GD+Z, S250GD+Z, S280GD+Z)

o TU 14-101-497 (deep drawing, extra deep drawing and super deep drawing quality)

o GOST 14918 (drawing classes VG, G, N, HP, etc.)

By type of coating:

· paint

· plastisol

Coating colours are selected based on RAL Classic or RAL Design colour charts.

By extent of coating:

· one-side

· two-side

· one-layer

· multi-layer